| Outputs | : | Frequency output |
| Fitting Size | : | 3" + |
| Flow Sensor Type | : | Impeller |
| Hot-Tap Option | : | Yes |
| Application | : | Flow |
| Fitting Material | : | Brass | Steel | Polymer |
| Flow Measurement Accuracy | : | ±1% of F.S. |
| Flow Measurement Range | : | 0.5 - 30 ft/s (0.2 - 9 m/s) |
| Flow Measurement Repeatability | : | ±0.3% of F.S. |
| Medium | : | Water based liquids |
| Model | : | 226BR0005-1211 |
| Operating Fluid Temperature | : | Rated 221 °F (105 °C) continuous |
| Pipe Material | : | Copper | Polymer | Steel | Stainless Steel |
| Product Type | : | Sensor |
| Range | : | 228 Series |
| Product Certification | : | CE Equipment Class A EN 50082-2 and EN 55014 |
| Warranty | : | 1 year |
These devices are designed for hot tap applications in pipes that cannot be drained for service. Use with a flow monitor or transmitter for a complete flow monitoring system.
- Signal can travel up to 2000 ft between the sensor and the display unit without the need for amplification
- Six-bladed impeller design with a proprietary, non-magnetic sensing mechanism for high accuracy and repeatability, forward-swept impeller is less prone to fouling by water-borne debris, reliable performance with minimal downtime
- Hot tap design for use in applications where the pipe cannot be drained for service after installation, reduce downtime for maintenance
- PPS electronics housing
- Standard electronics
- Pennlon bearing, nylon impeller, tungsten carbide shaft, EPDM O-rings
Datasheet
