| Mounting | : | Nipple |
| Current Measurement Range | : | 0.1 - 20A |
| Measurement Type | : | AC Current |
| Output Specifications | : | N.O. 100 mA @ 30 VAC/DC |
| Outputs | : | Switch output | Relay |
| Relay Coil Voltage | : | 24 VAC/DC |
| Relay Contact Ratings | : | Resistive: 20 A @ 277 VAC | Resistive: 20 A @ 28 VDC | Motor: 1 H.P. @ 120 VAC | Motor: 1 H.P. @ 208 VAC | Motor: 2 H.P. @ 250 VAC | Motor: 2 H.P. @ 277 VAC | Tungsten: 10 A @ 120 VAC |
| Relay Poles/Throw | : | SPST |
| Setpoint | : | Fixed |
| Application | : | Building Automation Systems |
| Current Sensor type | : | Current Switch, AC |
| Model | : | H120 |
| Monitored Frequency Range | : | 50 - 60 Hz |
| Operating Humidity | : | 10 - 90% RH, non-condensing |
| Operating Temperature | : | 5 - 140 °F (-15 - 60 °C) |
| Product Type | : | Sensor |
| Range | : | Status Series |
| Product Certification | : | UL |
| Relay Construction | : | Mechanical |
| Warranty | : | 5 years |
The H120 offer a fixed current switch and SPST relay in a single externally mounted housing. Combining the current sensor and relay in one easy-to-install package eliminates the need to fit multiple devices into small electrical enclosures and simplifies the installation. Remove the labor associated with installing a separate current sensor.
- 2-in-1 - current switch and relay are in series connect the contacts to the load and your current switch is automatically installed
- The nipple mount housing can be connected to any 1/2 in conduit knockout for installation versatility
- Relay coil LED streamlines job commissioning and check out
- HP ratings make the H120 ideal for control and status of fractional HP motors
- 0.1 A turn-on - easily monitors the smallest loads
- NEMA 1 rated housing may be used in plenum spaces
- Induced from relay coil sensor power
Datasheet
