| Measurement Type | : | None |
| Outputs | : | Protocol Communication |
| Communication | : | BACnet (MS/TP) | Modbus (RTU) |
| Application | : | Parking Garage | Space Gas Detection |
| Application Zone | : | Parking Garage | Plant Room | Living Space |
| Brand | : | Veris |
| Color | : | Black |
| Communication Specifications | : | Baud Rate: 9600, 19200, 38400, 57600 (ModBus), 76800 (BACnet) |
| Dimension Depth | : | Installed Depth: 1.2" (30 mm), total depth: 2.3" (57 mm) |
| Dimension Height | : | 4.5" (113 mm) |
| Dimension Width | : | 2.75" (70 mm) |
| Electrical Wiring Size | : | 24 - 12 AWG (0.22 - 2.5 mm²) |
| Enclosure Material | : | ABS Plastic |
| IP Protection | : | IP20 |
| Model | : | GWN |
| Mounting | : | North American Duplex Box |
| Operating Humidity | : | 0 - 90% RH, non-condensing |
| Operating Temperature | : | -4 - 122 °F (-20 - 50 °C) |
| Product Type | : | Sensor Base |
| Range | : | GWNP |
| Product Certification | : | CE | ETL |
| Warranty | : | 5 years |
| LED Indicator Type | : | Green: On/Yellow: Low Setpoint/Red: High Setpoint |
| Operating Current | : | 60 mA max. |
| Standards EMC | : | UL 61010-1 |
| Supply Voltage AC Nominal | : | 24 VAC |
| Supply Voltage AC Range | : | 20 - 28 VAC |
| Supply Voltage DC Nominal | : | 24 VDC |
| Supply Voltage DC Range | : | 15 - 30 VDC |
GWNP series protocol communications platform offers a convenient means for sensing gases in the environment. The GWNP is mounted to any single-gang electrical box and wired to the building controller. Then, a single AGxx gas sensor (sold separately) is installed in the GWNP. With this design, there is no need for a costly new installation when a sensor reaches the end of its life. The GWNP platform remains installed, and the installer simply opens the GWNP housing to replace the modular sensor inside, reducing labor costs and downtime. AG series sensors can be swapped in the GWNP platform at any time with minimal effort. The GWNP platform converts the signal from the AG sensor into protocol communications compatible with building control systems.
- Communication - interface to control system via BACnet and Modbus protocols. BTL certified
- Modular platform accepts Veris AG series sensors (sold separately) no need to install a new GWNP when the sensor life wears out
- Three colored LEDs - red, yellow and green - for easy status viewing
- Microprocessor controlled excellent stability operation
- No calibration required, easy maintenance and worry-free
- Versatile interface - interface to DDC systems or direct fan control
Datasheet
