| Mounting | : | Split Core |
| Current Measurement Range | : | 0 - 30 A | 0 - 60 A | 0 - 120 A |
| Measurement Type | : | AC Current |
| Output Specifications | : | 4 - 20 mA |
| Outputs | : | Analog output | Relay |
| Relay Coil Voltage | : | 24 VAC/DC |
| Relay Contact Ratings | : | Resistive: 5 A @ 250 VAC | Resistive: 5 A @ 30 VDC | Inductive: 2 A @ 250 VAC | Inductive: 2 A @ 30 VDC |
| Relay Poles/Throw | : | SPST |
| Application | : | Building Automation Systems |
| Current Measurement Accuracy | : | ±2% of F.S. above 10% of F.S. |
| Current Sensor type | : | Current Transducer, AC |
| Electrical Wiring Size | : | 24 - 14 AWG (0.2 - 2.1 mm²) |
| Model | : | H931 |
| Monitored Frequency Range | : | 50 - 60 Hz |
| Monitored Wire Size | : | 0.8" (21 mm) |
| Operating Humidity | : | 10 - 90% RH, non-condensing |
| Operating Temperature | : | 5 - 140 °F (-15 - 60 °C) |
| Product Type | : | Sensor |
| Range | : | HX31 Series |
| Product Certification | : | UL | CE |
| Relay Construction | : | Mechanical |
| Warranty | : | 5 years |
The Hawkeye H931 provides accurate load trending information with a proportional 4 to 20 mA output signal. These devices offer three amperage ranges for versatility, with easy slide-switch selection. The command relay is fully integrated in the device, but it is isolated from the current transducer. This combination makes these products ideal for start/stop control and status monitoring of motors, using one device instead of two.
- Loop powered analog current transducer with integral start/stop command relay
- Reduces the number of installed components, saves time and space
- Self-gripping, split-core design for fast retrofit installation, no need to remove conductor
- Reduces installation charges - one device to install for start/stop and status
- Fewer wires - power the current sensor and receive the 4 to 20 mA signal with only two wires
- Selectable factory calibrated ranges up to 120 A for increased flexibility and resolution
- 30 mA at 12 to 30 VDC sensor power
Datasheet
